+49 (0)2192/85930-0

                 |

 

DEBURRING ROLLERS FAPI-FLEX

KNOW-HOW

Burrs occur when sheet metal is punched, plasma cut, laser cut, torch cut, etc. With the development of our deburring wheels and deburring rollers FAPI-FLEX, we have successfully addressed the challenge faced in operations to deburr or round the "sharp" edges on workpieces. With the use of these highly versatile tools, both with portable machines and automatic machines, sheet metal can be rounded or deburred optimally.
Our engineers and application technicians are available for you at any time by phone or email.

deburring roller FAPI-FLEX

PRODUCT FEATURES

• Extraordinary increase in service life

The use of our specially developed deburring wheels and deburring rollers FAPI-FLEX has led to an extreme increase in service life. In practical use it has been proven that, our deburring wheels and deburring rollers have twice or three times the service life compared with conventional wheels and rollers.

• Axial arrangement of the grinding flaps

The grinding grain sides of the slitted abrasive cloth flaps are arranged axially on the roller. The knocking against one another of the grinding grain sides and the resulting premature destruction of the grinding facing, which occurs when the abrasive cloth flaps are arranged radially, is avoided.

• Short equipment set-up times

The easy assembly or disassembly of the machines allows extremely short set-up times.

• Extremely high abrasive cloth rate

An extremely high abrasive cloth rate on the deburring wheels and deburring rollers FAPI-FLEX results in a significant improvement in service life.

• Variable Dimensions

It is possible to manufacture deburring rollers in various densities, facing lengths and abrasive cloth types.

deburring rollers FAPI-FLEX on a carousel grinder
deburring rollers FAPI-FLEX on a ERNST roll grinder
deburring rollers FAPI-FLEX on a ERNST roll grinder
• Versatile areas of application

The deburring wheels and deburring rollers FAPI-FLEX are used with portable machines as well as with carousel grinding machines and two or multi-roll roller grinding machines.

• Special abrasive cloth flap designs

As a standard, the deburring wheels and deburring rollers FAPI-FLEX are provided with abrasive cloth flaps which are continuously slotted.
As special design, the possibility exists to produce the abrasive cloth flaps with disconnected slits – the so called bridge slot. Thus results in achieving a better surface on small workpieces while using the deburring wheels and deburring rollers.

• Cost-benefit-relationship

The cost-benefit-relationship of the deburring wheels and rollers FAPI-FLEX is optimally laid-out for our customers.

Deburring roller for use on Fladder machines Deburring roller for use on roller machines (The 12 mm slope of the meshed roller elements prevents line formations!)

DIMENSIONS

diameter
[ in mm ]
width
[ in mm ]
30506075100125150
150
200
250
300
350
400
◊ = production type, delivery time on request
Additional dimensions and holes on request!

ORDER EXAMPLES

order example for Timesavers-machines:

article-no. 161804494
deburring rollers
FAPI-Flex-K K180/X-Flex
350/150/3x450/462x80,1 mm

order example for Ernst-machines (SPIN):

article-no. 161225381
deburring rollers
FAPI-Flex-K K120/341XMF
300/125/3x250/262x65 mm

order example für Ernst-machines (ROTOR):

article-no. 161525409
deburring rollers
FAPI-Flex-K K150/341X
300/100/2x450/462x60,1 mm

Cookies make it easier for us to provide you with our services. With the usage of our services you permit us to use cookies.
More information Ok